Arcane Blue Rose - Powder and Ekko Pendant
This is a digital 3D printable model of the Blue Rose Pendant from Arcane Season 2, inspired by Powder’s and Ekko’s iconic gift. This elegant piece is perfect for fans of the series or cosplayers to create an accurate pendant from Arcane 2.
The pendant is designed to be printed with filament layer changes for an accurate show-inspired look. For optimal results, adjust the bridge flow ratio to 2 in your slicer settings. Assembly is simple—just use a small piece of filament to thread through the pendant’s hole.
SIZE
At 100% scale, the model’s dimensions are:
• Diameter: 50 mm
• Width: 4 mm
3D PRINTING SETTINGS
We use these settings for most of our prints:
• Layer height: 0.15 mm
• Infill: 15%
• Supports: Not required
Additional Tips:
• Change filament colors during printing for a layered design effect.
• Adjust the bridge flow ratio in your slicer to 2 for better-bridging results.
https://youtube.com/shorts/rnbiCQEeLG0
Printing settings may vary depending on your specific printer.
This model is designed for easy printing and assembly, but you can also post-process it by sanding or painting it for a polished look.
Do you like the model but don’t have access to a 3D printer? Many local services offer 3D printing—check for providers in your area.
We’re 3Demon, a team of 3D modeling and printing enthusiasts from Prague. We’ve been creating printable models for over a decade, ranging from cosplay accessories to artistic designs like this one. Explore more of our work or join our community to see what we’re up to!
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This is a digital 3D printable model of the Blue Rose Pendant from Arcane Season 2, inspired by Powder’s and Ekko’s iconic gift. This elegant piece is perfect for fans of the series or cosplayers to create an accurate pendant from Arcane 2.
The pendant is designed to be printed with filament layer changes for an accurate show-inspired look. For optimal results, adjust the bridge flow ratio to 2 in your slicer settings. Assembly is simple—just use a small piece of filament to thread through the pendant’s hole.
SIZE
At 100% scale, the model’s dimensions are:
• Diameter: 50 mm
• Width: 4 mm
3D PRINTING SETTINGS
We use these settings for most of our prints:
• Layer height: 0.15 mm
• Infill: 15%
• Supports: Not required
Additional Tips:
• Change filament colors during printing for a layered design effect.
• Adjust the bridge flow ratio in your slicer to 2 for better-bridging results.
https://youtube.com/shorts/rnbiCQEeLG0
Printing settings may vary depending on your specific printer.
This model is designed for easy printing and assembly, but you can also post-process it by sanding or painting it for a polished look.
Do you like the model but don’t have access to a 3D printer? Many local services offer 3D printing—check for providers in your area.
We’re 3Demon, a team of 3D modeling and printing enthusiasts from Prague. We’ve been creating printable models for over a decade, ranging from cosplay accessories to artistic designs like this one. Explore more of our work or join our community to see what we’re up to!